How To Remove Floating Shelves

Removing floating shelves is not as difficult as you may think. There are a few simple steps that can be followed in order to get the job done. First, remove the screws that are securing the shelf to the wall. Once these screws are removed, the shelf can be pulled away from the wall. Next, use a towel or rag to clean any debris that may have accumulated on the surface of the shelf during its time on the wall.

What is a Floating Shelf

A floating shelf is a shelf that is attached to the wall with hidden brackets or screws. They are popular because they are very easy to install and they give the appearance of being “floating” on the wall. Floating shelves can be used in any room of the house, but they are especially popular in kitchens and bathrooms.

How is the Shelf Attached to the Wall

When installing floating shelves, it is important to attach them securely to the wall. This can be done in a few different ways, but the most common is to use screws or bolts to attach the shelf to the wall studs. If there are no studs available, anchors can be used to attach the shelf to the drywall. First, find the studs in the wall and mark them with a pencil. Then, pre-drill pilot holes into the studs and insert anchors. Finally, screw or bolt the shelf to the anchors.

French Cleat

When installing floating shelves, it is often helpful to use a French cleat. This allows you to easily remove the shelves if needed. A French cleat is made of two pieces of wood that are attached at a 45 degree angle. The top piece is then screwed to the wall, and the bottom piece is screwed to the back of the shelf. This creates a V-shape that holds the shelf in place. To remove the shelf, you simply pull it down off the wall.

Glue or Paint

In order to remove a floating shelf, one must first identify the type of adhesive that is holding it in place. If the shelf is glued to the wall, then a hot water bath may be necessary to soften the adhesive and allow for easy removal. If the shelf is held in place with paint, then a chisel and hammer may be required to pry it off of the wall.

Step-by-Step Instructions to Remove a Floating Shelf

First, remove any screws that are holding the shelf in place. If there are no screws, then you will need to pry it off the wall. 

Next, use a putty knife to wedge in between the shelf and the wall. Gently pry it off and then set it aside. 

Lastly, clean off the adhesive residue with a hot water and vinegar solution. Use a cloth or sponge to scrub it until it’s gone. Allow the area to dry before replacing the shelf.

Remove any External Screws on the Shelf

There are a few screws on the sides of the floating shelf that are visible. These need to be removed in order to take the shelf off. There may also be screws on the back of the shelf that are not visible. If there are any screws on the back, they will need to be removed as well in order to take the shelf off.

Loosen Paint

Sagging or loose paint is a common issue with floating shelves. This problem can be fixed by tightening the screws or nails that hold the shelf in place. If this does not work, the loose paint can be removed and the shelf re-painted. First, use a putty knife to remove as much of the loose paint as possible. Next, use a wire brush to scrub away any remaining paint. Finally, dry the shelf with a towel and re-paint it with a coat of primer and two coats of paint.

Lift Up or Out

Do you have a piece of furniture that you just can’t seem to make work in your space? Maybe it’s a bookshelf that’s too big, or a dresser that doesn’t quite fit the width of your bed. A floating shelf is a great way to fix this problem! Floating shelves are shelves that appear to be “floating” on the wall because they are attached to the wall with hidden brackets. This makes them a great option for spaces where you don’t have much available wall space.

Removing floating shelves is a simple process. The first step is to remove the screws that hold the brackets to the wall. Once the screws are removed, you can pull the shelf off of the brackets. If there is any adhesive left on the bracket, you can use a cleaning product like Goo Gone to remove it.

Remove the Brackets

Removing floating shelves is a relatively easy process that can be completed in just a few minutes. The first step is to remove the brackets that hold the shelves in place. This can be done by unscrewing the screws at the top and bottom of the bracket. Once the screws are removed, the bracket can be gently pulled away from the wall. If there is any adhesive left on the wall, it can be removed with a cleaning solution or a degreaser. The brackets can then be reinstalled once the adhesive has been removed.

Remove Drywall Anchors

Removing a floating shelf is a simple process. First, find the wall anchors that are holding the shelf in place. These anchors are typically small drywall screws or nails that are topped with a small circular disk. Use a screwdriver or drill to remove the anchors. Once they are removed, the shelf will come loose and can be easily removed from the wall.


In conclusion, if you have floating shelves and would like to remove them, there are a few methods that you can try. Each method has its own set of pros and cons, so be sure to choose the one that will work best for your needs.

Scroll to Top